Eurobond Metal Epoxy Putty

Eurobond Metal Putty is a hand-kneadable, speciality epoxy putty that can be used to permanently repair many different substrates. It will bond fibreglass, metals, wood, concrete and glass, and can even be applied underwater (fresh or salt). It is suitable for repairing leaking tanks and drums, patching holes in pipes, stopping leaks, repairing cracks and holes…

UV Power Pen – LED Technology

The UV Power Pen is an LED technology based, reliable point source with an output spectrum of 365nm +/- 10nm producing 3500mW/cm². The use of LED UV curing devices offers huge benefits over high pressure lamp systems. LED’s do not emit IR radiation and with this reduced heat output the processing of almost all heat…

Come and visit us at Sign & Digital UK 2017

Come and visit Eurobond Adhesives at the UK’s leading annual event for the sign making industry.  You can see our range of high performance adhesives, adhesive tapes and other bonding solutions which we supply to thousands of sign making companies throughout Europe. We will be demonstrating our Penloc® range to fast curing structural adhesives which include…

Eurobond Adhesives launch FlexiFix®

Eurobond FlexiFix® is a fast curing, 2-part flexible structural adhesive designed to bond just about any material combination including most metals, powder coated or wet painted metals, plastics (except for low surface energy plastics such as PTFE, Polyproylene etc), glass, woods, composites, Dibond, GRP, stone and brick. FlexiFix® has high resistance to peel and shear…

Surface preparation for a better bond

Prior to bonding two components it’s essential that both surfaces are cleaned and prepared properly. This will ensure that potential contamination such as oil, grease, dirt etc cannot interfere with the bonding process. Failure to prepare the surfaces correctly may reduce the performance of the adhesive and could lead to bond failure. Bond line failure…

Electrically Conductive Adhesives

Electrically conductive adhesives have been around for many decades. In fact it was the advent of the American/Russian space race in the 1960’s that really propelled conductive adhesive technology to the forefront in electronic design.  At the time NASA was looking for an alternative system that would replace or reduce wiring, traditional electronic devices and…