Eurobond Metal Putty is a hand-kneadable, speciality epoxy putty that can be used to permanently repair many different substrates. It will bond fibreglass, metals, wood, concrete and glass, and can even be applied underwater (fresh or salt). It is suitable for repairing leaking tanks and drums, patching holes in pipes, stopping leaks, repairing cracks and holes in concrete and brickwork. Eurobond Metal Epoxy Putty will harden in ten minutes and the repaired item can be back in service in 1 hour. Full strength in reached in 24 hours.
Directions for Use: Lightly abrade parts to be bonded, filled or repaired. Ensure the parts are dry, clean and free from dirt, oil or grease. Cut the Metal putty stick to size and handroll / knead the putty until it is an even grey colour. Firmly apply to substrate, pushing and moulding to required shape. Smooth any edges with a wetted finger or knife. After 10 minutes the surface of the repaired area can be sanded down for a smooth finish. When fully cured the putty can be drilled or tapped etc.
To find out more details; click on the link below.