Prior to bonding two components it’s essential that both surfaces are cleaned and prepared properly. This will ensure that potential contamination such as oil, grease, dirt etc cannot interfere with the bonding process. Failure to prepare the surfaces correctly may reduce the performance of the adhesive and could lead to bond failure. Bond line failure through lack of proper preparation may costs time, money and your reputation.
We recommend that surfaces are lightly abraded where possible using Eurobond Abrasive Pads. Our abrasive pads help to remove difficult residues and key surfaces. All surfaces should then be thoroughly cleaned using Eurobond Surface Cleaning Wipes prior to bonding. Eurobond Surface Cleaning Wipes are large, heavy duty low lint wipes specially impregnated with the right amount of Isopropyl alcohol and demineralised water. They are designed to remove oil, dirt, grease and dust from surfaces prior to bonding. The cleaning agent will ‘flash off’ in seconds leaving the substrate dry and ready to bond. Being heavy duty means that they are hard wearing and won’t fall apart when used to rub down surfaces. Our cleaning wipes comes in handy plastic pots, with ‘flip top lids’, each containing 100 wipes. Eurobond Surface Cleaning Wipes are much more user friendly and safer than having liquid cleaning chemicals around the workplace. They help to maintain quality control, reduce the potential for the wrong liquid cleaner being used and also help to reduce costs on waste or spilt liquid cleaners.
You can buy either single pots containing 100 IPA wipes or purchase outer boxes containing 6 pots. The abrasive pads come in packs containing 10 pads. Contact our sales team to order your Eurobond Surface Cleaning wipes or Abrasive Pads. Tel 01795 427888 or email firstname.lastname@example.org . You can also simply buy them from our online shop. Just click on the highlighted links to find out more about the products featured and to view our extensive range of adhesives etc.