Structural Adhesives
Penloc® HP, High Temperature Resistant (180°C), 2-Part, Fast Curing, Structural Adhesive
£13.57 – £140.04 ex vat
Penloc® HP Is a high temperature resistant, 2-part, fast curing toughened structural acrylic adhesive ideally suited to bonding almost anything to anything except low surface energy materials such as PP, PE, Nylon and PTFE. Penloc® HP will tolerate -55° to +180°C making it ideal for bonded parts that require stove enamelling or for use in high temperature environments. Penloc® HP is available in 50ml and 400ml cartridges. To find out about our full range of Penloc® products please call our technical team.
FULL ITEM DESCRIPTION / ADDITIONAL INFORMATION
Penloc® HP Is a high temperature resistant, 2-part, fast curing toughened structural acrylic adhesive ideally suited to bonding almost anything to anything except low surface energy materials such as PP, PE, Nylon and PTFE. Penloc® HP will tolerate -55° to +180°C making it ideal for bonded parts that require stove enamelling or for use in high temperature environments. Penloc® HP will bond most metals, plastics, glass, GRP, stone, concrete, modern composite material, wood and much more. Penloc® HP will cure in just 5 minutes to handling strength and fully cure in just one hour. Penloc® HP is available in 50ml and 400ml cartridges.
Please note: The 50ml & 400ml cartridges require the correct dispensing gun and nozzle to fit the cartridge. 50ml starter kits are also available for our Penloc ranges. These contain; 1 x 50ml cartridge, 1 x 50ml dispensing gun, 3 x nozzles and 1 x abrasive cleaning pad.
To see our range of applicator guns, nozzles and other accessories please click here
For more information on the full range of Penloc products please call our sales or technical team.