Penloc® VT Plus, Thick, 2-Part, High Temperature Resistant, Structural Adhesive
£13.56 – £140.04 ex vat
Penloc® VT Plus Is a very thick 2-part toughened acrylic structural adhesive. It has an open time of approx. 20 minutes and will cure in approximately one hour. Penloc VT Plus will bond almost any material combination except low surface energy materials such as PP, PE and PTFE. Penloc VT Plus exhibits good gap fill capability. It can be used to bond metals that require powder coating afterwards. Will tolerate -40°C to +200°C
FULL ITEM DESCRIPTION / ADDITIONAL INFORMATION
Penloc® VT Plus is a very thick 2-part toughened acrylic structural adhesive. It has an open time of approx. 20 minutes, will cure in 1 hour and will bond almost any material combination. Penloc VT Plus offers good gap fill capability. Penloc VT plus can be used to bond metals that require powder coating afterwards it will tolerate 200°C in either a tunnel or box oven. Penloc VT Plus is available in either 50ml or 400ml cartridges from Eurobond Adhesives Ltd.
Please note: The 50ml & 400ml cartridges require the correct dispensing gun and VT Plus nozzle to fit the cartridge. 50ml starter kits are also available for our Penloc ranges. These contain; 1 x 50ml cartridge, 1 x 50ml dispensing gun, 4 x nozzles and 1 x abrasive cleaning pad.
To see our range of applicator guns, nozzles and other accessories please click here
For more information on the full range of Penloc products please call our sales or technical team.